LEADING EDGE · FOOT-LEVEL TIE-OFF · SRLS
Leading Edge Self-Retracting Lifelines in Canada
SRLs their makers rate for leading-edge work: decking, steel erection, flat roofs and anywhere the anchor sits at your feet and the line can bend over an edge in a fall.
Quick answerIf your anchor is at or below your back D-ring, or your lifeline could drag across steel, concrete or a roof edge during a fall, you need an SRL marked leading-edge rated. A standard overhead SRL is not built for that load.
LEADING EDGE SRLS ◆ FOOT-LEVEL ANCHORS ◆ WEB & CABLE ◆ SINGLE & TWIN LEG ◆ SHIPS FROM PARIS, ONTARIO ◆ CAD — NO DUTIES
When do you need a leading-edge SRL?
THREE SIGNS
ANCHOR AT YOUR FEET
Tying off to the deck, a beam flange or a low anchor means a longer free fall before the unit locks.
LINE OVER AN EDGE
In a fall the lifeline loads across the edge. LE units use a line and energy absorber meant to take that.
WORKING OFF TO THE SIDE
Moving sideways from the anchor adds swing. Follow the maker's setback and offset limits.
Check clearanceFoot-level tie-off needs more fall clearance than overhead tie-off. Use the clearance chart in the maker's manual for the exact model before work starts.
Shop leading-edge rated SRLs
CAD PRICING · ADD TO CART
Other self-retracting lifelines
KEEP BUILDING THE SYSTEM
Leading edge SRLs: common questions
ANSWERS YOU CAN CITE
01What does leading-edge rated mean?
The maker has tested the SRL for falls where the lifeline contacts an edge and for tie-off below the D-ring. The rating and class are marked on the unit and listed on the product page.
02Can I use a leading-edge SRL overhead too?
Usually yes, but follow the maker's instructions for each mounting position.
03Are these SRLs CSA certified?
It depends on the brand and model, and each product page states its actual rating. Some FallTech models list CSA Z259.2.2, while Frontline and Malta Dynamics units are ANSI/OSHA rated, not CSA. Match the rating to your provincial rules, or call 437-475-2066 and we will check it for you.
04Do I retire an SRL after a fall?
Take it out of service immediately and follow the maker's instructions for inspection or return.