The Frontline 100RCTB Combat™ Reflective Series Harness is the complete go-to solution for workers who need full body harness performance with enhanced 360° visibility. Safety orange high-tenacity polyester webbing combined with 360-degree reflective tape ensures workers stand out and can be spotted more easily — by equipment operators, vehicle drivers, and co-workers — across every job site environment, day or night.
◈ 360° Reflectivity — Be Seen from Every Angle
The 100RCTB's full 360-degree reflective tape wraps the harness so workers are visible from every direction — front, back, and sides. On road work sites, near active machinery, and in low-light conditions, that visibility isn't a comfort feature — it's a critical layer of protection. Combined with safety orange polyester webbing, the 100RCTB is one of the most visible harnesses available in its class.
⚠️ Integrated Suspension Trauma Straps
Suspension trauma (orthostatic shock) can occur within minutes of a fall when a worker is suspended motionless in a harness, restricting blood flow to the legs. The 100RCTB includes integrated suspension trauma straps that allow a suspended worker to stand up in the harness and relieve pressure on the femoral arteries — buying critical time until rescue arrives. On road work and heavy construction sites where equipment is active and rescue access can be complex, this feature is essential.
5 Points of Adjustability
Five independent adjustment points provide a snug, customized fit for a wide range of body types — keeping the harness comfortable and properly positioned throughout a full shift on the tools.
360° Reflective Tape
Full-wrap reflective tape ensures the worker is visible from every angle — front, back, and sides — in low-light environments, near active equipment, and in road work conditions where visibility is a life-safety requirement.
Safety Orange Webbing
High-tenacity safety orange polyester webbing provides high-visibility identification on site, making the worker easier to spot by equipment operators and vehicle drivers during active construction.
Reinforced Belt with Rigid Pad
Reinforced belt and rigid waist pad provides the structural support needed to carry a tool belt without the harness falling, sagging, or shifting during active construction work.
Moisture-Wicking Pads
Back, shoulder, and waist pads use moisture-wicking material for improved breathability and a more comfortable fit, reducing fatigue and heat exhaustion during extended elevated work.
Aluminum Quick-Connect & Tongue Buckles
Aluminum quick-connect buckle on the chest strap and tongue buckles on the leg straps enable fast, easy donning and doffing with secure, reliable adjustment every time.
Lanyard Keepers
Two lanyard keepers on the shoulder straps keep the lanyard off the ground and out of the worker's path when not in use — reducing trip hazards on elevated work surfaces and platforms.
Technical Specifications
| Model | 100RCTB |
| Series | Combat™ Reflective Construction |
| Style | Full body construction harness |
| Webbing | High tenacity safety orange polyester with black stitching |
| Reflectivity | 360° full-wrap reflective tape |
| Adjustability | 5 points of adjustment |
| Chest Buckle | Aluminum quick-connect |
| Leg Buckle Type | Tongue buckle |
| Belt | Reinforced with rigid pad for tool belt support |
| Pads | Moisture-wicking back, shoulder & waist pads |
| Lanyard Keepers | 2 × shoulder strap lanyard keepers |
| Suspension Trauma Straps | Integrated |
| Breaking Strength | 5,000 lbs |
| Max User Weight Capacity | 310 lbs |
| Standards | Meets or exceeds applicable ANSI & OSHA standards |
| 3rd Party Testing | Independent lab accredited to ISO/IEC 17025:2017 |
Pre-Use Inspection Requirements
Inspect the harness before every use. Check all webbing for cuts, abrasions, burns, chemical damage, and UV degradation. Use the black contrasting stitching on orange webbing as your primary stitching inspection reference — any broken or pulled stitching is grounds for removal from service. Inspect the reinforced belt, rigid pad, and reflective tape strips for damage or delamination. Verify all buckles, D-rings, and hardware for proper function. Any harness subjected to a fall must be immediately removed from service and replaced, regardless of apparent condition. Follow manufacturer inspection guidelines and applicable provincial OHS regulations at all times.
Built for Canadian Worksites
The Frontline 100RCTB is the choice for contractors, safety managers, and site supervisors across Canada who work in environments where worker visibility is as critical as fall arrest performance — road work, high-rise construction, oil and gas, and any site where equipment, vehicles, and workers share the same space. The 100RCTB delivers everything the 100CTB offers, with the added protection of 360-degree reflective tape and safety orange webbing for maximum on-site recognition.
- 360° reflective tape ensures visibility from every direction in low-light and active-equipment environments.
- Safety orange webbing maximizes worker recognition on busy construction and road work sites.
- Integrated suspension trauma straps provide critical post-fall protection while awaiting rescue.
- Reinforced belt with rigid pad supports a tool belt without harness sag or shift.
- 5 points of adjustability for a snug, comfortable fit across varying body types.
- Independently tested by an ISO/IEC 17025:2017 accredited third-party laboratory.
Ships from Canada (Stock Dependent)
We aim to ship from within Canada whenever inventory is available. Some components may ship from the United States depending on stock levels.