The Frontline LIS62RA features an internal shock absorber, eliminating the external shock pack for a clean, lightweight profile. Aluminum rebar hook ends reduce hardware weight significantly compared to steel, while elasticized webbing retracts to a shorter relaxed length — keeping the lanyard off the ground and reducing trip hazards throughout the workday.
Safety
Internal shock absorber, impact indicators, and 100% tie-off twin leg design.
Comfort
Aluminum hardware and elastic webbing reduce weight and fatigue over a full shift.
Productivity
Elastic retraction keeps the lanyard managed and clear, allowing workers to move freely.
Aluminum Rebar Hook Ends
Lightweight aluminum hardware on both legs significantly reduces overall lanyard weight compared to steel, helping minimize fatigue during extended elevated work.
Elasticized Webbing
Elastic construction retracts to a reduced relaxed length, keeping the lanyard off the ground and reducing potential tripping hazards throughout the workday.
100% Tie-Off Capability
Twin leg design allows users to connect on either end, maintaining continuous anchor point connection while transitioning between work positions.
Internal Shock Absorber
No external shock pack — shock absorption is built directly into the lanyard body, limiting fall forces to 900 lbs or less with a clean, streamlined profile.
Impact Indicators
Visual indicators activate upon a fall event, providing an immediate and clear signal that the lanyard must be removed from service.
Lightweight & Extremely Durable
High-strength polyester webbing paired with aluminum hardware delivers maximum durability without unnecessary weight on the worker.
Technical Specifications
| Model | LIS62RA |
| Series | Elite Lite™ Premium |
| Free Fall Rating | 6 ft. shock absorbing free fall |
| Leg Configuration | Twin leg with aluminum rebar hook ends |
| Webbing Type | Elasticized (retractable relaxed length) |
| Tie-Off | 100% tie-off capability |
| Max Arrest Force | 900 lbs or less (internal shock absorbing design) |
| Webbing Breaking Strength | 6,000 lbs |
| Snaphook Gate Strength | 3,600 lbs |
| Hook Material | Aluminum |
| Standards | Meets or exceeds ANSI Z359.13-2013 & applicable OSHA standards |
Impact Indicator & Inspection Requirements
This lanyard is equipped with impact indicators that activate visually after a fall event. Any lanyard subjected to a fall must be immediately removed from service and replaced, regardless of visible damage. Always inspect equipment prior to each use in accordance with manufacturer guidelines and applicable provincial OHS regulations.
Built for Canadian Worksites
The Frontline LIS62RA Elite Lite™ is the premium choice for ironworkers, structural trades, and safety managers across Canada who demand more than baseline fall arrest performance. The combination of aluminum rebar hooks, elastic webbing, and 100% tie-off capability makes it purpose-built for workers spending full shifts at elevation where comfort, mobility, and compliance are all non-negotiable.
- Aluminum rebar hook ends reduce hardware weight to minimize shift fatigue.
- Elastic webbing retracts to a shorter relaxed length, reducing trip hazards.
- 100% tie-off — twin leg design keeps workers continuously connected during transitions.
- Internal shock absorber keeps fall forces at 900 lbs or less with no external shock pack.
- Meets or exceeds ANSI Z359.13-2013 and applicable OSHA standards.
Ships from Canada (Stock Dependent)
We aim to ship from within Canada whenever inventory is available. Some components may ship from the United States depending on stock levels.