Guardian 00455 Temper roof anchor, quarter view
$184.99
Passer aux informations sur le produit
Guardian 00455 Temper roof anchor, quarter view
1/3

Guardian 00455 Temper Reusable Roof Anchor, 4-Pack | Canada

$184.99

Guardian 00455 Temper reusable roof anchor, 4-pack. A Type A anchorage connector in zinc-plated steel for wood, metal and concrete. Installs over the roof peak (0/12 to 12/12) or on a flat surface (0/12 to sheer), with an adjustable hinge, D-ring, offset holes that help keep the truss from splitting and a screen-printed label. Reusable with new fasteners each install; 3.5 lb each.

⚠
Compliance in Canada: OSHA / ANSI, not CSAGuardian lists OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.18-2017 and ANSI A10.32-2012 for the 00455. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Reusable roof anchor
Strength
5,000 lb MBS
Capacity
130-420 lb, 1 user
Weight
3.5 lb each

Guardian 00455 Temper roof anchor key features

  • Type A anchorage connector in zinc-plated steel
  • Adjustable hinge and D-ring attachment point
  • Offset holes help keep the truss from splitting
  • Installs on wood, metal or concrete
  • Reusable: new fasteners for each new installation
  • Screen-printed safety label instead of a paper label
  • Minimum service temperature -30°F

Guardian 00455 Temper roof anchor specifications

Manufacturer Guardian Fall Protection
Model 00455 Temper Anchor (sold here as a 4-pack)
Type Type A anchorage connector
Weight 3.5 lb each
Material Zinc-plated steel
Minimum breaking strength 5,000 lb
Worker capacity 130-420 lb, 1 user
Roof pitch Over the peak 0/12 to 12/12; on a flat surface 0/12 to sheer
Substrate Wood 3/4 in total combined; metal 20 gauge; concrete 4 in, 4,000 psi
Fasteners Wood: 16d nails or #12 2 in wood deck screws (12 over a truss, 32 into the field); metal: 16 x #12 2 in metal deck screws; concrete: 8 x 1/4 x 2 3/4 in concrete screws
Horizontal lifeline Only parallel to the long end of the plate, supervised by a Qualified Person
Standards OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.18-2017, ANSI A10.32-2012

Where the 00455 Temper roof anchor earns its keep

Over the peak

Straddles the ridge on pitches up to 12/12.

Field of the roof

Installs flat on the deck with the field fastener pattern.

Metal and concrete decks

Rated for 20 gauge metal and 4 in concrete.

Crew trucks

A 4-pack to keep a reusable anchor on every job.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

00455 Temper roof anchor questions and CSA status

Is the Guardian 00455 Temper roof anchor CSA certified?

No. Guardian lists OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.18-2017 and ANSI A10.32-2012, not CSA Z259. For CSA-marked anchors see our Safety Direct range.

Can the Guardian Temper anchor be reused?

Yes, in multiple installations with new fasteners each time. Never reinstall it if it is damaged or will not lie flush.

What roof pitch does the Guardian 00455 Temper fit?

0/12 to 12/12 installed over the roof peak, and 0/12 to sheer installed on a flat surface.

Can the Guardian Temper anchor take a horizontal lifeline?

Only if the lifeline runs parallel to the long end of the anchor plate, with setup supervised by a Qualified Person.

Pair the 00455 Temper roof anchor with a full system

Pair the Temper with a full-body harness and a rope lifeline or SRL for a complete fall arrest system.