Malta Dynamics E-39R30 39 in perimeter defense cone on 30 lb base
$102.99
Passer aux informations sur le produit
Malta Dynamics E-39R30 39 in perimeter defense cone on 30 lb base
1/3
  • Malta Dynamics E-39R30 39 in perimeter defense cone on 30 lb base
  • Malta Dynamics E-39R30 cones marking a roof edge
  • Malta Dynamics perimeter cones with warning flags on a flat roof
Malta Dynamics E-39R30 39" Perimeter Cone, 30 lb Base | Canada

Malta Dynamics E-39R30 39" Perimeter Cone, 30 lb Base | Canada

$102.99

Malta Dynamics E-39R30 39" Perimeter Defense Cone with 30 lb Roof Edge Base. A two-piece, stackable 39 in stanchion for marking rooftop hazards. The high-impact polyethylene cone sits on a 30 lb recycled rubber base that holds it in wind and sits on the roof without penetrating it. Warning flags are sold separately.

⚠
Compliance in Canada: OSHA / ANSI, not CSAMalta Dynamics states the E-39R30 is OSHA 1926.502(f) compliant to warn of leading-edge hazards. It is perimeter marking, not personal fall protection. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Warning line stanchion
Height
39 in (99 cm)
Base
30 lb recycled rubber
Weight
35 lb (15.9 kg)

Malta Dynamics E-39R30 perimeter defense cone key features

  • Two-piece, stackable stanchion, 39 in tall
  • Stackable with or without base
  • Easy flag tie-off system
  • Large grip handle and reinforced loop handle for carrying
  • High-impact polyethylene: nonconductive and UV resistant
  • Heavy base made of 100% recycled tire rubber
  • Skid-resistant base will not damage surfaces or leave rust marks on roofs
  • Sits on the roof without penetrating it
  • Malta Dynamics states it is OSHA 1926.502(f) compliant

Malta Dynamics E-39R30 39 in perimeter cone specifications

Manufacturer Malta Dynamics
Model / SKU E-39R30
Height 39 in (99 cm)
Cone material High-impact polyethylene, nonconductive, UV resistant
Base 30 lb (13.6 kg) recycled tire rubber
Weight 35 lb (15.9 kg)
Base dimensions Not published by Malta Dynamics; ask us
Flags Sold separately
Standards OSHA 1926.502(f), as stated by Malta Dynamics

Where to use the Malta Dynamics E-39R30 perimeter cone

Roof edge marking

Set cones about 8 ft apart and string warning flags.

Leading edges

Warn workers of open edges on decks and floors.

Kit top-up

Add cones to a warning line layout for longer runs.

Replacement

Replace a damaged cone or base in an existing kit.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

Malta Dynamics E-39R30 cone questions and CSA status

Is the Malta Dynamics E-39R30 perimeter cone CSA certified?

No. No CSA rating is published; Malta Dynamics rates its equipment to OSHA/ANSI, not CSA. For CSA-marked equipment see our Safety Direct range.

Does the Malta Dynamics E-39R30 come with warning flags?

No. Malta Dynamics sells the perimeter warning flags separately.

Does the Malta Dynamics E-39R30 need anchoring to the roof?

No. The 30 lb rubber base sits on the roof without penetrating it.

How heavy is the Malta Dynamics E-39R30 cone with base?

Malta Dynamics lists 35 lb with the 30 lb recycled rubber base.

Pair the Malta Dynamics E-39R30 cone with warning flags

Run Malta Dynamics E-M2014 105 ft warning flags between E-39R30 cones, or buy the complete 105 ft warning line kit with 15 cones. A warning line marks the hazard; workers at the edge still need a guardrail or fall arrest system.