Super Anchor 1031-PG CRA-PT 5 Inch HLL Pass-Thru Anchor | Canada
Super Anchor 1031-PG CRA-PT 5 Inch HLL Pass-Thru Anchor documents
Super Anchor Safety's own documents.
Super Anchor 1031-PG CRA-PT 5 Inch HLL Pass-Thru Anchor | Canada
The Super Anchor 1031-PG is a 5 inch CRA-PT pass-thru anchor post: a No. 1091 cast steel pass-thru top on a foam filled, hot dip galvanized Schedule 40 riser with a 6x6x3/8 inch 4-hole base plate and included stainless attachment bolts. It is the intermediate anchor for CRA horizontal lifeline systems, letting the HLL cable run through the top so workers travel the entire span without disconnecting. Space intermediate anchors at a maximum of 30 ft in CRA horizontal lifelines up to 240 ft, used with the No. 5010-SM connector ring for hands-free travel. The 4-hole base also bolts to the corner holes of the 1207 standing seam plate for HLL runs on metal roofs. 5,000 lb minimum tensile strength, ANSI Z359.18-17 and OSHA 1926.502 compliant per the 01-2023 CRA manual.
Typical Applications for the Super Anchor 1031-PG
- HLL Intermediate Anchor — Supports the cable between end anchors on spans up to 240 ft.
- Standing Seam Roofs — Bolts to 1207 plates for HLL runs across metal roofs.
- Ridge Line Lifelines — Continuous tie-off along commercial roof ridges.
- Concrete Decks — Wedge bolt, epoxy, or poured-in-place installations.
- Structural Steel — Bolt attached or field welded to steel members.
- Metal Decking — Attached to Type B decking per fastener specifications.
- Wood Framing — Bolted with backer plates per the manual figures.
- Long Roof Runs — Hands-free travel with the 5010-SM connector ring.
Super Anchor 1031-PG Specifications
| Specification | Detail |
|---|---|
| SKU | 1031-PG |
| Pass-Thru Top | No. 1091 Q235 cast steel, designed for use with the No. 5010-SM connector ring |
| Riser | 5 inch height, 3.0 inch O.D. Schedule 40, polyurethane foam filled, ASTM 123 hot dip galvanized |
| Base Plate | 6 x 6 x 3/8 inch with 4 bolt holes; includes 4 stainless 1/2 x 1-3/4 inch bolts with lock nuts and washers |
| Function | Horizontal lifeline intermediate anchor only |
| HLL System | CRA horizontal lifelines up to 240 ft; maximum 30 ft between intermediate anchors |
| Minimum Tensile Strength | 5,000 lb |
| User Capacity | 1 person at 340 lb maximum including tools and equipment on the system; 6 ft maximum free fall |
| Temperature Rating | -30 to +130 degrees F |
| Structural Requirement | 5,000 lb or 2 times the intended fall protection load per OSHA 1910.140 |
| Attachment | Bolted, field welded, or concrete embedded; HLL anchors must not be screw attached |
| Compliance | ANSI Z359.18-17 Type A/T; OSHA 1926.502 and 1910.140; CSA Z259.15:22 Type A/T; HLL third-party engineering by DH Glabe and Associates |
| Brand | Super Anchor Safety |
Super Anchor 1031-PG Standards — ANSI, OSHA & CSA Use in Canada
For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1031-PG — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.