Super Anchor 1035-W CRA 8" Loop Top Anchor Post | Canada
Super Anchor 1035-W CRA 8" Loop Top Anchor Post manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
Super Anchor 1035-W CRA 8" Loop Top Anchor Post | Canada
The Super Anchor 1035-W is an 8 inch CRA commercial roof anchor post with a No. 1090 cast steel loop top rated at 10,000 lb tensile strength on a foam filled, hot dip galvanized 3.0 inch Schedule 40 riser. The 16x16x3/8 inch base plate carries 52 fastener holes for screw or bolt attachment, and the anchor is third-party certified with a 5,000 lb ultimate strength in any direction the load is applied. What is included: the anchor post only; lifeline rigging hardware shown in photos is sold separately. Use it as a single person tie-off point, a window washing anchor, or an end anchor in CRA horizontal lifeline systems.
Typical Applications for the Super Anchor 1035-W
- Tie-Off Anchor — Single person PPE anchor on commercial roofs and structures.
- HLL End Anchor — End anchorage for CRA horizontal lifeline runs, typically 120 ft.
- Window Washing — Suspension and fall arrest anchorage per ANSI/IWCA 1-14.1.
- Ballasted and Gravel Roofs — 8 inch riser keeps the loop top above surfacing.
- Concrete Decks — Wedge bolt, epoxy, or poured-in-place installations.
Super Anchor 1035-W Specifications
| Specification | Detail |
|---|---|
| SKU | 1035-W |
| Model | No. 1035-W, CRA-8W |
| Loop Top | No. 1090 Q235 cast steel, 1-3/8 inch inside diameter, 10,000 lb minimum tensile strength |
| Riser | 8 inch height, 3.0 inch O.D. Schedule 40, polyurethane foam filled, ASTM 123 hot dip galvanized |
| Base Plate | 16 x 16 x 3/8 inch with 52 fastener holes: 40 at 3/8 inch for screws and 12 at 9/16 inch for 1/2 inch bolts |
| Ultimate Strength | 5,000 lb minimum in any direction the load is applied to the loop top |
| Proof Load | Maximum 2,500 lb on site; do not proof load screw attached anchors |
| Design Load | 1,250 lb at a 4 to 1 design factor |
| Brand | Super Anchor Safety |
Super Anchor 1035-W Standards — ANSI, OSHA & CSA Use in Canada
For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1035-W — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.