Super Anchor 1068 ARS Type-II Truss Roof Anchor 2-Pack Kit | Canada
Super Anchor 1068 ARS Type-II Truss Roof Anchor 2-Pack Kit manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
Super Anchor 1068 ARS Type-II Truss Roof Anchor 2-Pack Kit | Canada
The Super Anchor ARS Type-II is a permanent roof anchor designed to install during truss fabrication or at the jobsite. Developed with a major truss hardware manufacturer, it installs with a cordless drill and a single attachment bolt, so anchors can be plotted on the builder plans and fitted to the corresponding truss without lifting the truss or driving nails. The Type-II is factory fitted with a warning label over the attachment hole to remind users that the structure must be properly braced before use. Super Anchor's 2025 ARS manual gives it a 5,000 lb minimum breaking strength, lists OSHA 1926.502 and ANSI Z359.18-17 Type D, and specifies it for fall arrest or fall restraint only — not for work positioning, HLL systems, hoisting or lifting.
Key Features of the Super Anchor 1068-B
- One person, single bolt install — Fits with a cordless drill, air ratchet, socket, or wrench using a single attachment bolt.
- Built for the truss plant — Designed for production truss factory installation and bulk packaged for that environment.
- No nails, no truss lifting — Anchors plot on the builder plans and fit the corresponding truss without lifting it.
- Factory warning label — A label covers the attachment hole to warn that the structure must be braced before use.
- 5,000 lb minimum breaking strength — Per Super Anchor's 2025 ARS manual.
Super Anchor 1068-B Specifications
| Specification | Detail |
|---|---|
| SKU | 1068-B-2PK |
| Manufacturer Part Number | 1068 / 1068-B |
| Type | Permanent Type-II truss plant roof anchor |
| Material | 14 gauge 430 stainless steel with grade 8 bolt |
| Minimum strength | 5,000 lb minimum breaking strength (Super Anchor 2025 ARS manual) |
| Max arrest force | 3,600 lb (16 kN) |
| Max user weight | 310 lb (140 kg) including tools and equipment |
| Max slope | 24/12 |
| Brand | Super Anchor Safety |
Super Anchor 1068-B Standards — ANSI, OSHA & CSA Use in Canada
OSHA 29 CFR 1926.502: Federal construction fall protection anchorage requirements. ANSI Z359.18-17 Type D: American National Standard for anchorage connectors, Type D. For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Safety note: The structure must be fully braced and sheathed before the Type-II is used for fall protection. The anchor is an anchorage point only; use a full-body harness with a connecting device and confirm fall clearance. Teko nails alone do not arrest a fall; the attachment bolt is required.
Buy the Super Anchor 1068-B — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.