Malta Dynamics C5004 6' Single-Leg Internal Shock-Absorbing Lanyard — 2 Snap Hooks | Canada
Malta Dynamics C5004 6' Single-Leg Internal Shock-Absorbing Lanyard manual and documents
Malta Dynamics' own documents. Read the instruction manual before first use.
SHOCK-ABSORBING LANYARDANSI Z359.13 / OSHA · NOT CSAMODEL C5004
The Malta Dynamics C5004 is a 6 ft single-leg lanyard with the energy absorber built directly into the web for a lightweight, low-profile package that holds average arrest force to 900 lb or less. Two steel snap hooks, 1 in polyester webbing.
Malta Dynamics C5004 6 ft internal shock lanyard key features
Malta Dynamics C5004 6 ft internal shock lanyard specifications
| Model | C5004 |
| Product type | Shock-Absorbing Lanyard |
| Length | 6 ft |
| Standards | ANSI Z359.13 / OSHA 1910 and 1926 (per Malta Dynamics) · not CSA Z259 |
| Brand | Malta Dynamics |
CERTIFICATION — ANSI Z359.13 / OSHA · NOT CSA
Malta Dynamics lists this product as meeting ANSI Z359.13 and OSHA 1910/1926 requirements. It is not CSA Z259 certified. If your site or jurisdiction requires CSA-marked fall protection, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Malta C5004 6 ft internal shock lanyard FAQ for Canadian sites
Is the Malta Dynamics C5004 CSA certified for Canadian sites?
No. Malta Dynamics lists the C5004 as meeting ANSI Z359.13 and OSHA 1910/1926 requirements; it is not CSA Z259 certified. Many Canadian sites accept ANSI/OSHA-rated equipment, but confirm with your site safety officer and provincial OHS authority before use. If your site requires the CSA mark, see our Safety Direct collection.
How much fall clearance does the C5004 shock-absorbing lanyard need?
Plan for the lanyard length plus deceleration distance, your standing height and a safety margin — often around 18.5 ft below an anchor at D-ring height for a 6 ft energy-absorbing lanyard. Always verify against the manufacturer’s clearance chart.
How often should the C5004 shock-absorbing lanyard be inspected?
Inspect before every use and remove from service immediately if the energy absorber has deployed. A competent person should also perform a documented formal inspection at least annually.