Super Anchor 1033-4G CRA-4 18" 4-Way Anchor Post | Canada
Super Anchor 1033-4G CRA-4 18" 4-Way Anchor Post documents
Super Anchor Safety's own documents.
Super Anchor 1033-4G CRA-4 18" 4-Way Anchor Post | Canada
The Super Anchor 1033-4G is a 18 inch CRA-4 4-way anchor post, the riser that anchors horizontal lifeline intersections when fitted with the No. 1054 4-Way Top Fixture, sold separately. The foam filled, hot dip galvanized 3.0 inch Schedule 80 riser stands on a 52-hole 16x16x3/8 inch base plate, and the anchor is third-party certified with a 5,000 lb ultimate strength. What is included: the riser post with base plate only; the No. 1054 top fixture is not included. The bare riser tube accepts the No. 1054 4-Way Top Fixture, which is required and sold separately, secured with a 1/2 x 4-1/2 inch stainless attachment bolt and 3 set screws.
Typical Applications for the Super Anchor 1033-4G
- HLL Intersections — T, 90 degree, 45 degree, and 4-way run junctions.
- Multi-Run Roof Systems — Ties several lifeline runs to one anchor point.
- Thick Insulation Packages — 18 inch riser clears built-up commercial roof assemblies.
- Single Person Tie-Off — Loop top PPE anchorage via the 1054 fixture.
- Concrete Decks — Wedge bolt, epoxy, or poured-in-place installations.
Super Anchor 1033-4G Specifications
| Specification | Detail |
|---|---|
| SKU | 1033-4G |
| Model | 1033-4G, CRA-4 18 inch |
| Top Fixture | No. 1054 4-Way Top Fixture required, sold separately; attaches with a 1/2 x 4-1/2 inch stainless hex bolt with seal washers both ends plus 3 set screws |
| Riser | 18 inch height, 3.0 inch O.D. Schedule 80 [8mm], polyurethane foam filled, ASTM 123 hot dip galvanized |
| Base Plate | 16 x 16 x 3/8 inch with 52 fastener holes; use the 9/16 inch holes with a minimum of 4 certified 1/2 inch bolts |
| Ultimate Strength | 5,000 lb minimum in any direction the load is applied |
| Proof Load | Maximum 2,500 lb on site |
| Design Load | 1,250 lb at a 4 to 1 design factor |
| Brand | Super Anchor Safety |
Super Anchor 1033-4G Standards — ANSI, OSHA & CSA Use in Canada
For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1033-4G — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.