Super Anchor 1036 Hold-Me Rope Termination Anchor | Canada
Super Anchor 1036 Hold-Me Rope Termination Anchor manual and documents
Documents from Super Anchor Safety's product page. Read the instruction manual before first use.
ROPE TERMINATION ANCHOR · 1 WORKERANSI Z359.1-2007 · OSHA 1926.502PART 1036 · 5/8 IN LIFELINES
The Super Anchor Hold-Me is an anodized aluminum anchor plate that connects a 5/8 in rope lifeline to structure without knots or factory terminations. The rope weaves through its six holes, so you can terminate a vertical lifeline at any point along its length. It works with all of Super Anchor's 5/8 in vertical lifelines and is rated for one user up to 310 lb.
Super Anchor 1036 Hold-Me rope termination key features
How to thread a 5/8 in lifeline through the Hold-Me anchor
Connect the Hold-Me plate to an anchor, then weave the 5/8 in lifeline through its six holes as shown in the end termination plate instruction manual linked above. The friction path holds the rope with no knot. Use it with Super Anchor's 5/8 in vertical lifelines and a compatible rope grab.
Super Anchor 1036 Hold-Me rope termination anchor specifications
| Part | 1036 · Hold-Me temporary rope termination anchor (UPC 786158103601) |
| Device | 1 person rope termination anchor plate |
| Rating | Fall arrest and fall restraint |
| Capacity | 1 worker, max weight 310 lb |
| Minimum breaking strength | 5,000 lb |
| Material | Anodized aluminum |
| Size | 2 in wide x 10 in tall, 6 holes |
| Lifeline size | 5/8 in diameter |
| Standards | OSHA 1926.502, 1910 · ANSI Z359.1-2007, A10.32-2012 |
CERTIFICATION — ANSI Z359.1 / OSHA 1926.502 · NOT CSA
The end termination plate manual linked above lists ANSI Z359.1-2007, ANSI A10.32-2012, OSHA 1910 and OSHA 1926 Subpart M (US fall protection standards). It shows no CSA Z259 mark, so treat it as not CSA certified. If your site or jurisdiction requires CSA-marked equipment, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor Hold-Me rope anchor questions and answers
What rope size works with the Hold-Me anchor?
5/8 in diameter lifelines, including all of Super Anchor's 5/8 in vertical lifelines.
Do I need to tie a knot with the Hold-Me plate?
No. It connects the rope to structure without knots or factory terminations.
Is the Super Anchor Hold-Me CSA certified?
The end termination plate manual lists ANSI Z359.1-2007, ANSI A10.32-2012, OSHA 1910 and OSHA 1926 Subpart M, and no CSA standard. See Safety Direct for CSA gear.
How many workers can use one Hold-Me anchor plate?
One worker, up to 310 lb.